Charging and Removing Trackers

To charge NURVV Run Trackers:

  • Take the right tracker and plug it into the right side of the charger.  The charger is marked with an R for right and an L for left and the right tracker is the one with the Activity button.
  • Take the left tracker and plug it into the left side of the charger.
  • Plug the power cable into the charger, and plug the other end of the power cable into a USB port on a device or wall outlet. 
  • The tracker status lights will display a slow pulsing red light to indicate that the trackers are charging.
  • When the trackers are fully charged, the status lights on the trackers will be lit solid green.

  NOTE: Always unplug the power cable before inserting or removing your trackers from the charger.  

NURVV Run trackers will allow 5hrs of running on a full charge.

Removing trackers from the charger

Replacement charger

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.